Folding doors Light AL601F

 
 

LIGHTWEIGHT AND ELEGANT, BUT STILL STURDY AND DURABLE.

This best describes the aluminium folding door AL601F – our lightest folding door.


 

 
Cross-section of folding door AL601F
 
 
PRODUCT INFORMATION
TECHNICAL DETAILS
DOWNLOADS
 

GENERAL INFORMATION
Aluminium folding door with frame-lattice design. Design depth of 60 mm. Wall thickness of at least 2 mm.
Frame profiles are connected to the leaf of a folding door by means of double bolts.
40 mm finger-pinch protective rubber between the door leaves. Panels made of aluminium or insulating glass.
The door leaves are suspended by guided roller units.
The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 16 mm thick. Covered bolt lock.
Creating an opening for people to pass through occurs with no loss in stability.
All of the door components can be replaced easily without damaging other components!

 

SIZES
- maximum width of door leaves:  1200 mm (door width: 4 + 0 = 4800 mm) 
- maximum height of door leaves: 4500 mm 

 

GLAZING
Insulating tempered glass of up to 1 m2 per door leaf. Plastic glazing with no limitations. Glazing as dry glazing with rubber sealing on both sides.


PANELS
1 mm thick aluminium sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.

 

SURFACE FINISH
- powder-coated with façade quality, standard colour of your choice 
- anodised with A6/C0


OPERATION
- manually operated
- power-operated with folding door drive BASIC

 

SLIDING BOLT MECHANISM

Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar.
Operation via a robust steel loop lever and a cased lock that is integrated into the profile.

HINGES

The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 16 mm; with dust-proof thrust bearing.

GLAZING BEADS

The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides

GUIDE RAIL WITH ROLLER UNITS

The guide rail is only open at the bottom, and has an integrated seal carrier and continuous lip sealing. The door leaves are suspended by roller units. The track rollers are supported by dust-proof, maintenance-free ball bearings. The dimensions are adapted to suit the load that each type of door can handle

 
PRODUCT DOCUMENTATION
 
 
Prospekt Industrie-Falttore/Schiebefalttore (D)
download as a:
PDF- file
 
 
download selected items
Brochure Industrial (Sliding-) Folding Doors (E)
download as a:
PDF- file
 
 
download selected items
Brochure Portes Pliantes (Coulissantes) Industrielles (F)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Standard (D)
download as a:
PDF- file
 
 
download selected items
 
 
Betriebsanleitung Falttor BR600 - Basic Antrieb (D)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Öffnungsautomatik (D)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door BR600 - Manually (E)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door BR600 - Basic Drive (E)
download as a:
WORD- file
 
 
download selected items
 
 
Operating Manual Folding Door BR600 - Automatic Opening Funktion (E)
download as a:
PDF- file
 
 
download selected items
 
TEXT FOR INVITATION TO TENDER
 
 
Ausschreibungstext Falttor AL601F 2.0 Light
download as a:
WORD- file
PDF- file
 
 
download selected items
 
PLANNING DOCUMENTS
 
 
Architektenblatt Falttor AL601F 2.0 Light
download as a:
DWG- file
PDF- file
 
 
download selected items
Technische Unterlagen Falttore BR600 2018
download as a:
PDF- file
 
 
download selected items
 
 
 

Folding doors Robust AL602F

VIDEO
 
 

Für jede Anforderung das exakt dafür konstruierte Tor.

Falttore sind im Prinzip sehr einfach und doch sehr vielseitig in ihrem Einsatzbereich. Von kleinen Werkstatttoren über Feuerwehrtore bis hin zu riesigen Flugzeughangartoren werden Falttore stets ihren Anforderungen gerecht.
Profilschnitt Falttor AL602F
 
 
PRODUCT INFORMATION
TECHNICAL DETAILS
DOWNLOADS
 

ALLGEMEINE INFORMATIONEN

Aluminium Falttor in Rahmen-Sprossen-Konstruktion. Bautiefe 60 mm. Wandstärke min. 2 mm.
Rahmenprofile werden mit doppelter Verschraubung zu einem Falttorflügel verbunden.
Eingepresster Aluminiumteil als statisches Verbindungselement.
Fingerklemmschutzgummi 50 mm zwischen den Flügeln. Füllung mit Alu-Paneelen oder ISO-Glas.
Aufhängung der Torflügel durch horizontal geführte Laufwagen und kunststoffummantelte Laufrollen.
Lagerung der Laufrollen und Flügel mit staubdichten, wartungsfreien Kugellagern.
Justierbare Scharniere und Führungsbolzen mit 20 mm Achsen. Verdeckt liegendes Treibriegelschloss.
Ausführung eines Gehflügels oder einer Gehtüre erfolgt ohne Stabilitätsverlust.
Einfacher Austausch der kompletten Torkomponenten ohne Beschädigung möglich!

 

Grössen

- max. Flügelbreite 1300 mm (6+6=15600 mm Torbreite)
- max. Flügelhöhe  5600 mm

 

VERGLASUNG

ISO-Hartglas bis 2 m² durchgehend pro Flügel. Komplette Torverglasung möglich. Verglasung als Trockenverglasung mit beidseitigem Dichtgummi.

 

PANEELE

1 mm Aluminiumbleche verklebt mit 30 mm Hartschaumstyropor. Fixiert mit geklemmten Aluminium-Halteleisten. Einfacher Austausch der Füllungselemente möglich.

 

OBERFLÄCHE

- pulverbeschichtet in Fassadenqualität, RAL nach Wahl
- A6/C0 eloxiert

BEDIENUNG

- handbetätigt

- kraftbetätigt mit Falttorantrieb BASIC oder POWER

 
 

Treibriegelmechanismus

 

Von Hand betätigte Tore sind mit einem innenliegenden Treibriegelmechanismus und verdeckt eingebauten Riegelstangen aus verzinktem Vierkantstahl ausgeführt.
Betätigung über robusten Alu-Schlaufengriff und ein im Profil integriertes Kastenschloss

 

BÄNDER

 

Die einzelnen Flügel sind untereinander mit massiven, verstellbaren Metallbändern verbunden. Bandbolzendurchmesser 20 mm, mit staubdichtem Drucklager.

 

GLASHALTELEISTEN

 

Die doppelwandig isolierten Sicherheitsgläser werden mit geklemmten Aluminium-Glashalteleisten und Dichtgummi innen montiert. Dadurch ist ein einfaches Austauschen der Gläser z.B. bei Reparaturen gewährleistet. Verglasungen werden generell als Trockenverglasungen mit beidseitigem Dichtgummi ausgeführt.

 

 LAUFSCHIENE MIT LAUFWAGEN



Die Laufschiene ist nur nach unten offen, mit integriertem Dichtungsträger und durchgehender Lippendichtung. Aufhängung der Torflügel durch Laufwägen, Lagerung der Laufrollen mit staubdichten, wartungsfreien Kugellagern. Dimensionierung ist auf die jeweilige Belastung der Tortypen abgestimmt.

 
 
PRODUCT DOCUMENTATION
 
 
Prospekt Industrie-Falttore/Schiebefalttore (D)
download as a:
PDF- file
 
 
download selected items
Brochure Industrial (Sliding-) Folding Doors (E)
download as a:
PDF- file
 
 
download selected items
Brochure Portes Pliantes (Coulissantes) Industrielles (F)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Standard (D)
download as a:
PDF- file
 
 
download selected items
 
 
Betriebsanleitung Falttor BR600 - Basic Antrieb (D)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Power Antrieb (D)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Öffnungsautomatik (D)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door BR600 - Manually (E)
download as a:
PDF- file
 
 
download selected items
 
 
Operating Manual Folding Door BR600 - Basic Drive (E)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door BR600 - Power Drive (E)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door - Automatic Opening Funktion (E)
download as a:
PDF- file
 
 
download selected items
 
PLANNING DOCUMENTS
 
 
planning documents folding door AL602F
download as a:
DWG- file
PDF- file
 
 
download selected items
Technische Unterlagen Falttore BR600 2018
download as a:
PDF- file
 
 
download selected items
 
 
 

Folding doors Thermo AL603F

VIDEO
 
 

THERMALLY SEPARATED – A DOOR LIKE NO OTHER

Thermally separated profiles mean greater heat insulation and provide a solution for modern requirements. Two separated extruded aluminium profiles are connected by means of a glass-fibre reinforced plastic strip. This significantly reduces the heat flow from inside to outside, yet the overall stability of the design is not diminished.

Cross-section of folding door AL603F
 
 
PRODUCT INFORMATION
TECHNICAL DETAILS
DOWNLOADS
 

GENERAL INFORMATION
Aluminium folding door with thermally-separated frame-lattice design. Design depth of 60 mm. Wall thickness of at least 2 mm.
Frame profiles are bolted together and glued to the leaves of the folding door using mitres. 50 mm finger-pinch protective rubber between the door leaves. Panels made of aluminium or insulating glass. The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers. The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock. Creating an opening for people to pass through occurs with no loss in stability.


SIZES
- maximum width of door leaves: 1300 mm (door width: 6 + 6 = 15600 mm) 
- maximum height of door leaves: 5600 mm

GLAZING
Insulating tempered glass of up to 2 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.


PANELS
1 mm thick aluminium sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.


SURFACE FINISH
- powder-coated with façade quality, standard colour of your choice 
- anodised with A6/C0


OPERATION
- manually operated
- power-operated with folding door drive BASIC or POWER

 
SLIDING BOLT MECHANISM
Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar.
Operation via a robust aluminium loop lever and a cased lock that is integrated into the profile.
HINGES
The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 20 mm; with dust-proof thrust bearing.
GLAZING BEADS
The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides.
GUIDE RAIL WITH ROLLER UNITS
The guide rail is only open at the bottom, and has an integrated seal carrier and continuous lip sealing. The door leaves are suspended by roller units. The track rollers are supported by dust-proof, maintenance-free ball bearings. The dimensions are adapted to suit the load that each type of door can handle.
 
PRODUCT DOCUMENTATION
 
 
Prospekt Industrie-Falttore/Schiebefalttore (D)
download as a:
 
 
download selected items
Brochure Industrial (Sliding-) Folding Doors (E)
download as a:
PDF- file
 
 
download selected items
Brochure Portes Pliantes (Coulissantes) Industrielles (F)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Standard (D)
download as a:
PDF- file
 
 
download selected items
 
 
Betriebsanleitung Falttor BR600 - Basic Antrieb (D)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Power Antrieb (D)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Öffnungsautomatik (D)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door BR600 - Manually (E)
download as a:
PDF- file
 
 
download selected items
 
 
Operating Manual Folding Door BR600 - Basic Drive (E)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door BR600 - Power Drive (E)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door - Automatic Opening Function (E)
download as a:
PDF- file
 
 
download selected items
 
PLANNING DOCUMENTS
 
 
planning documents folding door AL603F
download as a:
DWG- file
PDF- file
 
 
download selected items
Technische Unterlagen Falttore BR600 2018
download as a:
PDF- file
 
 
download selected items
 
 
 

Folding doors Strong ST602F

 
 

STRONG AND RELIABLE FOR CONTINUOUS USE

In this area, the steel folding door ST602F cannot be surpassed. Particularly suitable for very large and fully-glazed doors.

Cross-section of folding door ST602F
 
 
PRODUCT INFORMATION
TECHNICAL DETAILS
DOWNLOADS
 

GENERAL INFORMATION
Steel folding door with frame-lattice design. Design depth of 60 mm. Wall thickness of at least 2 mm. Frame profiles are connected to the leaves of the folding door using mitres and by means of brazing. 50 mm finger-pinch protective rubber between the door leaves. Panels made of steel or insulating glass. The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers. The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock. Creating an opening for people to pass through occurs with no loss in stability.


SIZES
- maximum width of door leaves: 1300 mm (door width: 6 + 6 = 15600 mm) 
- maximum height of door leaves: 7000 mm

GLAZING
Insulating tempered glass of up to 4 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.


PANELS
1 mm thick steel sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.

 

SURFACE FINISH
- powder-coated with façade quality, standard colour of your choice


OPERATION
- manually operated
- power-operated with folding door drive BASIC or POWER

 
SLIDING BOLT MECHANISM
Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar.
Operation via a robust aluminium loop lever and a cased lock that is integrated into the profile.
HINGES
The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 20 mm; with dust-proof thrust bearing.
GLAZING BEADS
The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides.
GUIDE RAIL WITH ROLLER UNITS
The guide rail is only open at the bottom, and has an integrated seal carrier and continuous lip sealing. The door leaves are suspended by roller units. The track rollers are supported by dust-proof, maintenance-free ball bearings. The dimensions are adapted to suit the load that each type of door can handle.
 
PRODUCT DOCUMENTATION
 
 
Prospekt Industrie-Falttore/Schiebefalttore (D)
download as a:
PDF- file
 
 
download selected items
Brochure Industrial (Sliding-) Folding Doors (E)
download as a:
PDF- file
 
 
download selected items
Brochure Portes Pliantes (Coulissantes) Industrielles (F)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Standard (D)
download as a:
PDF- file
 
 
download selected items
 
 
Betriebsanleitung Falttor BR600 - Basic Antrieb (D)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Power Antrieb (D)
download as a:
PDF- file
 
 
download selected items
Betriebsanleitung Falttor BR600 - Öffnungsautomatik (D)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door BR600 - Manually (E)
download as a:
PDF- file
 
 
download selected items
 
 
Operating Manual Folding Door BR600 - Basic Drive (E)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door BR600 - Power Drive (E)
download as a:
PDF- file
 
 
download selected items
Operating Manual Folding Door - Automatic Opening Funktion (E)
download as a:
PDF- file
 
 
download selected items
 
PLANNING DOCUMENTS
 
 
planning documents folding door ST603F
download as a:
DWG- file
PDF- file
 
 
download selected items
Technische Unterlagen Falttore BR600 2018
download as a:
PDF- file
 
 
download selected items
 
 
 
This site uses cookies. Cookies are used for user guidance and web analytics and help to make this website better and more user-friendly. If you do not want a recording, you can disable it under privacy statement