Sliding folding doors Robust AL602SF

 
 

A SLIDING FOLDING DOOR IS ALWAYS THE RIGHT CHOICE.

Regardless of how different the relevant structures and the requirements are.
The applications of sliding folding doors range from small truck garage doors to gigantic aircraft hangar doors.

Cross-section of sliding folding door AL602SF
 
 
PRODUCT INFORMATION
TECHNICAL DETAILS
DOWNLOADS
 

GENERAL INFORMATION
Aluminium sliding folding door with frame-lattice design. Design depth of 60 mm. Wall thickness of at least 2 mm.
Steel side trackage for the folding of door leaves next to the clearance opening.
Frame profiles are connected to the leaf of a folding door by means of double bolts.
Pressed-in aluminium component as a static connecting element.
50 mm finger-pinch protective rubber between the door leaves. Panels made of aluminium or insulating glass.
The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers.
The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock.
Creating an opening for people to pass through occurs with no loss in stability.
All of the door components can be replaced easily without damaging other components!

Implementation mostly as a power-operated, electric sliding folding door.


SIZES
- maximum width of door leaves:  1300 mm (door width: 6 + 6 = 15600 mm)
- maximum height of door leaves: 5600 mm

GLAZING
Insulating tempered glass of up to 2 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.


PANELS
1 mm thick steel sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.

 

SURFACE FINISH
- powder-coated with façade quality, standard colour of your choice
- anodised with A6/C0


OPERATION
- manually operated
- power-operated with folding door drive BASIC

 
SLIDING BOLT MECHANISM
Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar.
Operation via a robust aluminium loop lever and a cased lock that is integrated into the profile.
HINGES
The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 20 mm; with dust-proof thrust bearing.
GLAZING BEADS
The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides.
SIDE TRACKAGE
The door face consists of individual, freely movable door leaves that are connected to each other by means of special hinges. When the door is opened, the door leaves that are positioned next to each other are pushed to the sides. Outside of the clearance width, the door leaves are guided by side trackage that is responsible for folding the door leaves.
 
PRODUCT DOCUMENTATION
 
 
brochure folding doors
download as a:
PDF- file
 
 
download selected items
 
PLANNING DOCUMENTS
 
 
planning documents sliding folding door AL602SF
download as a:
DWG- file
PDF- file
 
 
download selected items
 
 
 

Sliding folding doors Thermo AL603SF

 
 

THE THERMALLY SEPARATED SLIDING FOLDING DOOR.

Even in the case of large door widths, it meets the requirements regarding heat insulation and stability.

Cross-section of sliding folding door AL603SF
 
 
PRODUCT INFORMATION
TECHNICAL DETAILS
DOWNLOADS
 

GENERAL INFORMATION
Aluminium sliding folding door with thermally-separated frame-lattice design. Design depth of 60 mm.
Wall thickness of at least 2 mm. Steel side trackage for the folding of door leaves next to the clearance opening.
Frame profiles are bolted together and glued to the leaves of the folding door using mitres.
50 mm finger-pinch protective rubber between the door leaves. Panels made of aluminium or insulating glass.
The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers.
The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock.
Creating an opening for people to pass through occurs with no loss in stability.

Implementation mostly as a power-operated, electric sliding folding door.


SIZES
- maximum width of door leaves: 1300 mm (door width: 6 + 6 = 15600 mm)
- maximum height of door leaves: 5600 mm

GLAZING
Insulating tempered glass of up to 2 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.


PANELS
1 mm thick aluminium sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.

 
SLIDING BOLT MECHANISM
Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar.
Operation via a robust aluminium loop lever and a cased lock that is integrated into the profile.
HINGES
The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 20 mm; with dust-proof thrust bearing.
GLAZING BEADS
The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides.
SIDE TRACKAGE
The door face consists of individual, freely movable door leaves that are connected to each other by means of special hinges. When the door is opened, the door leaves that are positioned next to each other are pushed to the sides. Outside of the clearance width, the door leaves are guided by side trackage that is responsible for folding the door leaves.
 
PRODUCT DOCUMENTATION
 
 
brochure folding door thermally separated
download as a:
PDF- file
 
 
download selected items
 
PLANNING DOCUMENTS
 
 
planning documents sliding folding door AL602SF
download as a:
DWG- file
PDF- file
 
 
download selected items
 
 
 

Sliding folding doors Strong ST602SF

 
 

ELEGANT – ROBUST – VARIABLE

This defines the sliding folding door ST602SF.

Cross-section of sliding folding door ST602SF
 
 
PRODUCT INFORMATION
TECHNICAL DETAILS
DOWNLOADS
 

GENERAL INFORMATION
Steel sliding folding door with frame-lattice design. Design depth of 60 mm. Wall thickness of at least 2 mm.
Steel side trackage for the folding of door leaves next to the clearance opening.
Frame profiles are connected to the leaves of the folding door using mitres and by means of brazing.
50 mm finger-pinch protective rubber between the door leaves. Panels made of steel or insulating glass.
The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers.
The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock.
Creating an opening for people to pass through occurs with no loss in stability.

Implementation mostly as a power-operated, electric sliding folding door.


SIZES
- maximum width of door leaves: 1300 mm (door width: 6 + 6 = 15600 mm)
- maximum height of door leaves: 7000 mm

GLAZING
Insulating tempered glass of up to 4 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.


PANELS
1 mm thick steel sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.


SURFACE FINISH
- powder-coated with façade quality, standard colour of your choice


OPERATION
- manually operated
- power-operated with sliding folding door drive

 
SLIDING BOLT MECHANISM
Manually operated doors are equipped with an inner sliding bolt mechanism and covered, built-in lock bars made of galvanised square steel bar. Operation via a robust aluminium loop lever and a cased lock that is integrated into the profile.
HINGES
The individual door leaves are connected to each other by means of solid, adjustable metal hinges. Diameter of hinge pins is 20 mm; with dust-proof thrust bearing.
GLAZING BEADS
The double-walled insulated shatterproof glass is installed from inside with clamped aluminium glazing beads and rubber seals. This ensures that the glass can be replaced easily, for instance when repairs are necessary. Glazing is generally in the form of dry glazing with rubber sealing on both sides.
SIDE TRACKAGE
The door face consists of individual, freely movable door leaves that are connected to each other by means of special hinges. When the door is opened, the door leaves that are positioned next to each other are pushed to the sides. Outside of the clearance width, the door leaves are guided by side trackage that is responsible for folding the door leaves.
 
PRODUCT DOCUMENTATION
 
 
brochure folding doors
download as a:
PDF- file
 
 
download selected items
 
PLANNING DOCUMENTS
 
 
planning documents sliding folding door ST602SF
download as a:
DWG- file
PDF- file
 
 
download selected items
 
 
 
Diese Webseite verwendet Cookies. Cookies werden zur Benutzerführung und Webanalyse verwendet und helfen dabei, diese Website besser und benutzerfreundlicher zu machen. Mehr Infos hier: Legal notice
X